Davies Craig EWP130 Alloy Electric Water Pump & Digital Controller Combo

This combo kit from Davies Craig offers a saving over buying the components separately.

EBP130 Alloy Pump

The EWP130 is the latest electric water pump from Davies Craig and has been designed as a high capacity upgrade for the original EWP80 pump. Constructed using a robust aluminium alloy body which is powder coated for a long lasting corrosion free finish. The inlet and outlet bolt to flanges on the pump and the kit is supplied with straight and 90 degree fittings to allow for multiple fitting orientations.

The EWP130 pump flows 130 litres per minute making it suitable for large capacity engines or high revving / high power output competition engines.

The benefits of fitting a Davies Craig EWP (Electric Water Pump) over an existing mechanical pump are -

• Coolant is circulated after engine shutdown preventing hotspots
• Increased engine power and torque
• Better control of engine temperature
• Increased cooling capacity
• Improved fuel economy
• Increased engine life
• Radiator size and coolant capacity can be reduced saving weight
• Increase in maximum engine speed

Davies Craig EWP130 pump can be fitted as a standalone item, however to obtain the full benefits it is recommended that it is used with a digital controller which gives you full control over the engine running temperature. 

Davies Craig EWP pumps can be fitted as a standalone item, however to obtain the full benefits it is recommended that it is used with a digital controller which gives you full control over the engine running temperature.

Kit includes a selection of fittings to suit different hose sizes and installation instructions.

Digital Controller

This latest digital controller for cooling fans and Electric water pumps (EWP) is packed with features to ensure your cooling system stays at the optimum temperature.

An LCD display shows the current engine temperature and the required temperature (user settable). It also has symbols to indicate when either the cooling fans or pump are in operation. Audible alarms sound if the set temperature is exceeded by 10 deg C or if a temperature of 40 deg C is not reached within 5 mins of start up and also if the temperature exceeds 100 deg C.

When used in conjunction with a Davies Craig EWP this digital controller allows your engine to warm up quicker as it 'pulses' the pump until the engine is warm and then controls the pump speed to maintain the target engine temperature. The controller will also run the pump after engine shut down to eliminate hot spots (3 mins or until the temp is 10 deg C below the target temp).

The controller is factory set to 85 deg C but has 9 user settable temperatures ranging from 60 to 100 deg C. Simply set the temperature then let the controller do the rest.

The temperature probe can be mounted in the thermostat housing, top radiator hose or in the engine block close the coolant outlet.