Design Engineering Easy Loom Master Kit

The Easy Loom Master Kit from Design Engineering is a complete solution for restoring wiring harnesses. The kit uses a split sleeve so it can be fitted without the need to disconnect the wires. Shrink tube ends, silicone and electrical tape are included in the kit to provide a professional finish to your wiring loom

• Protects wiring looms from chafing and from the elements
• Easy to install due to the split sleeving
• Heat shrink tubing prevents water or dust ingress at the cable ends
• Provides a professional finish to wiring looms
• Resistant to most automotive fluids and chemicals
• Heat resistant to 149°C (300°F) constant

Easy Loom split wire sleeving makes organising any wiring loom... easy! Designed to offer protection to exposed wiring in looms fitted to all manner of vehicles, this split sleeving, unlike conventional sleeving, does not require the wires to be disconnected in order to be fitted. The sleeving itself possesses a certain amount of elasticity, particularly useful at the split where, once the wiring is in place, the sleeve simply returns to its usual position and closes the opening to provide compete protection for the wiring contained inside. Able to protect wiring from abrasion, chemicals and, of course, the natural elements, Easy Loom provides a clean and stylish look. Easy Loom can also be used to protect hoses or cables.

Kit Contents:
5 sizes of easy loom split sleeving - 1" x 6ft , 3/4" x 10ft , 1/2" x 30ft , 5/16" x 60ft , 3/16" x 15ft
3 sizes of heat shrink tubing - 3/8" x 2ft , 1/4" x 1ft , 1/2" x 1ft
2 sizes of cable ties - 40 x 8" long , 100 x 4" long
1 x roll of silicone tape 1" x 12ft
1 x roll of electrical tape