Dynojet Power Commander Quick Shifter

The Dynojet Quick shifter allows full throttle, clutchless shifting. It does this by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch. The Power Commander 5 incorporates all of the quick shifter functionality in with the main fuel controller and is fully programmable. The software provided allows the user to adjust the “kill time” as well as the minimum rpm level where the quick shifter will operate at (prevents the quick shifter working at low speeds, such as town riding etc). The Power Commander 5 also allows each gear to have its own “kill time settings” when a gear position input is connected.

There are two basic types of quick shifter sensor: A Shift Rod inline pressure/tension sensor and a linear travel sensor.

• The Shift Rod sensor mounts inline with the shift rod and is available in both pressure (push) or tension (pull) styles, depending on the direction that the shift rod moves during an up shift. Most applications will require a shift rod kit (available separately) for mounting.
• The Linear travel sensor kit is for applications where a bike does not have a shift rod, or the shift rod sensor will not fit. One end of the sensor is mounted to the gear shift lever, and the other to a fixed point on the frame/engine. It is available in both pressure (push) or tension (pull) styles and is supplied with a universal mounting kit.

Note: Certain bikes require an ignition module to function.