Aeromotive In Line High Flow Fuel Filter

Constructed from billet aircraft aluminium these in line fuel filters from Aeromotive offer unmatched flow with easy installation and maintenance.

Options are available to suit a range of applications -

• Option 1 - Features -10 JIC ports and a 10 micron (fine) replaceable paper element and is capable of flowing up to 250 gallons per hour with a pressure drop of less than 1 Psi. Recommended for fitting after fuel pump. 127mm Long, 50mm Diameter
• Option 2 - Features -10 JIC ports and a 100 micron (coarse), washable, stainless steel element. Capable of flowing up to 250 gallons per hour with a pressure drop of less than 0.5 Psi. Recommended for fitting before fuel pump. 127mm Long, 50mm Diameter. Red.
• Option 3 - Features 3/8 NPT ports and a 40 micron replaceable stainless steel element. Capable of flowing up to 150 gallons per hour with a pressure drop of less than 2 psi. Recommended for fuel pumps with lower flow rates. 90mm Long, 32mm Diameter. Red.
• Option 4 - Features 3/8 NPT ports and a 100 micron stainless steel element. Suitable for applications up to 3000 BHP this filter has minimum pressure drop (0.15 Psi). 90mm Long, 32mm diameter. Red.
• Option 5 - Features -10 JIC ports and a 10 micron microglass element. Pressure drop of less than 0.15 psi. Capable of supporting 3,000 bhp.
  Recommended for fitting after fuel pump. 127mm Long, 50mm Diameter. Red or Black finish.

Adaptors to suit various sizes of fuel pipe are available separately. See accessories.