Denali PowerHub2 Power Distribution Module

The PowerHub2 Power Distribution Module, manufactured by Denali and made in the USA allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, proficient manner. It’s CANbus (controller area network) compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hook up. Each of the six outputs can be individually set as “always on” or “switched” on/off with the ignition of the motorcycle.

Instead of attaching multiple ring terminals to your battery, use a PowerHub2! Denali designed the CANbus-safe PowerHub2 to allow simple and easy installation of electrical components. Each unit has six individually fused outputs. These are not your ordinary outputs. Simply plug the fuse in to the left or the right on the circuit board to make the accessory live all of the time or switched on/off with the bike’s ignition. The entire unit is rated for 30 Amps (360 watts). Each of the six circuits can handle up to 15A (180W) each – without exceeding a total sum of 30 Amps simultaneously. 

When installing the PowerHub2 on BMW CAN-Bus equipped motorcycles, you can use either the 194 Marker Bulb Can-Bus adapter (which is sold separately) or tap the original BMW power socket hot wire.
Features: Replaceable 30 amp Tyco/Bosch micro relay Water-resistant Compact Durable Choice between switched and constant power Specs.

PowerHub2 fuse block 2 ring terminals wiring harness with Posi-lock connector 

The contents in the box are as follows: PowerHub2 fuse block 2 ring terminals Wiring harness for connecting PowerHub2 to battery (includes switched “trigger” wire with Posi-tap connector) Self-adhesive hook and loop pad for providing a quick-release attachment method for connecting the Powerhub2 to a flat service.

You can hook up a battery charger to your motorcycle using the Power Hub 2 if you place the fuse in the correct position for continuous power