Eventuri Carbon Fibre Intake System

Eventuri's intake systems are beautifully sculpted in carbon fibre using the latest technology and filtration developments to bring you the most eye-catching aftermarket upgrade for your engine bay, with airflow and performance gains backed by thorough research, development and testing.

• The single piece carbon fibre intake tube increases airflow and performance
• Bespoke high-flow air filter increases the volume and flow of air into the intake
• The carbon fibre inlet scoop maximises direct airflow
• A CNC Machined breather adapter seals to the stock pipework
• Laser-cut debris guard protects the filter and inlet system.

Designed specifically for the BMW (E9x) M3, this Eventuri Carbon Fibre Intake System has been developed to provide the turbo's most efficient and direct airflow path. Eventuri's patented venturi stack housing and custom intake designs ensure that airflow remains as laminar as possible at all times. Combined with bespoke high-flow filters and vehicle-specific cold air feed/ducts, you get a fully optimised intake system that operates with the lowest inlet air temperatures possible and consistently delivers noticeable performance gains.

Performance Gain Dyno: 8-10hp, 10-12ft-lb
Performance Gain Road Dyno (Insoric): 16hp, 14Nm
IAT Difference with Ambient: Stock 7.5C: Eventuri 4.5C

V-Box Acceleration: 100-200kph Reduced By 0.3 Seconds

At first glance, it's obvious Eventuri intakes are different from the standard filter, intake pipe and heat shield combinations, offered by other aftermarket intake system makers.

Based on their extensive tuning and aeronautics background, the engineers at Eventuri are raising the standards for intake design and development. Focused on a complete solution, each vehicle-specific intake system is extensively developed using cutting-edge design, testing, and prototyping methods. Constructed from only the finest quality components, every intake system undergoes a barrage of Computational Fluid Dynamics (CFD) analysis, including volumetric airflow, intake temperature and dyno testing, to ensure accurate performance figures are achieved.

This system uses Eventuri's carbon fibre intake design which provides an aerodynamically efficient airflow path from the filter to the inlet manifold. The intake system retains the superb OE airbox/filter housing and comprises a fully redesigned 1-piece inlet tube, high-flow filter and a laser-cut stainless steel debris guard. The addition of a CNC-machined breather adaptor completes the connection to the OE pipework. As the inlet is connected directly to the engine, Eventuris engineers had to overcome the issue of flexibility, so specially designed neoprene compression bands are used to maintain the connection between the airbox and inlet when the engine moves, this maintains the optimal airflow.

Eventuri's carbon fibre inlet design utilises a high-flow urethane cone filter, which maintains the laminar air flow conditions as the internal geometry traverses from a circular to oval path. This achieves a much smoother airflow and eliminates the abrupt internal geometry changes found in OE stock inlet pipe and rubber concertina sections. This improved design allows the whole filter and inlet to act as a velocity stack, increasing the volume and speed of air entering the intake manifold, which directly translates to better engine performance.

The final parts of the intake system consist of a carbon fibre scoop, which sits in the primary air duct underneath the headlamp and efficiently directs ambient air into the airbox and a debris shield attached to the filter - this deflects debris and water from impacting the filter directly without impeding airflow

The OE filter and factory-fitted airbox systems create a more turbulent airflow due to the mating of a rectangular air filter/airbox system to a round turbo inlet. Replacing this inefficient set-up with a carbon fibre venturi stack/housing or custom intake design, combined with bespoke filtration, results in not only a more direct and smooth airflow all the way to the turbo/intake manifold, but a stunning visual upgrade for your engine bay, that is sure to make you the envy of anyone who sees it.

Replacement filter Type - E is available here

Full fitting instructions are found here

Contents:
Carbon Fibre Intake Tube
High Flow Urethane Cone Filter
Carbon Fibre Inlet Scoop
CNC Machined Breather Adapter
Laser Cut Stainless Steel Debris Guard
Silicon Coupler And Oem Specification Clamps