Request a catalogue

Available Catalogues

Category

Show Less

Brand

  1. Haltech (60)
  2. Link Engine Management (14)
Show Less

Promo Badge

  1. New (45)

Price

188 16025

Category

Showing All

Brand

Showing All

Promo Badge

Showing All

Price

Showing All

Sensors, Wiring & Accessories

Showing 24 of 74 items
Filter
Haltech Single Channel O2 Wideband Controller Kit
DKK 2,130.40 Ex VAT DKK 2,663.00 ALL TAXES PAID
Link Engine Management CAN - USB Tuning Cable
DKK 401.85 Ex VAT DKK 502.31 ALL TAXES PAID
Link Engine Management XS Expansion Loom For PlugIn ECU's
DKK 299.25 Ex VAT DKK 374.06 ALL TAXES PAID
Link Engine Management CAN Lambda Controller
DKK 2,650.50 Ex VAT DKK 3,313.13 ALL TAXES PAID
Link Engine Management E-Throttle Module For G4X ECU
DKK 2,180.25 Ex VAT DKK 2,725.31 ALL TAXES PAID
Link Engine Management Three Channel Inductive Igniter
DKK 1,128.60 Ex VAT DKK 1,410.75 ALL TAXES PAID
Link Engine Management Ballast Resistor
From DKK 513.00 Ex VAT From DKK 641.25 ALL TAXES PAID
Link Engine Management ECU Wiring Loom
From DKK 401.85 Ex VAT From DKK 502.31 ALL TAXES PAID
Link Engine Management CAN Cable To Flying Leads
DKK 427.50 Ex VAT DKK 534.38 ALL TAXES PAID
Link Engine Management ECU CAN - Serial Interface Tuning Cable
DKK 401.85 Ex VAT DKK 502.31 ALL TAXES PAID
Link Engine Management USB - Mini USB Cable
DKK 188.10 Ex VAT DKK 235.13 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 2500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 1500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Haltech Dual Channel O2 Wideband Controller Kit
DKK 3,234.72 Ex VAT DKK 4,043.40 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 1500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 1500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 1500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Haltech Plug & Play Adaptor Harness For Elite 1000 / 1500 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
New
Haltech R35 Coil Bracket
DKK 1,139.97 Ex VAT DKK 1,424.96 ALL TAXES PAID
New
Haltech R35 Coil Bracket Kit
DKK 5,030.22 Ex VAT DKK 6,287.78 ALL TAXES PAID
New
Haltech Nexus S2 / S3 Universal Wire In Harness
DKK 2,315.60 Ex VAT DKK 2,894.50 ALL TAXES PAID
New
Haltech Nexus R3 Universal Wire In Harness
DKK 2,593.47 Ex VAT DKK 3,241.84 ALL TAXES PAID
New
Haltech Plug & Play Adaptor Harness For Nexus S2 / S3 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
New
Haltech Plug & Play Adaptor Harness For Nexus S2 / S3 ECU
DKK 3,020.97 Ex VAT DKK 3,776.21 ALL TAXES PAID
Showing 24 of 74 items
Filter

Engine management sensors and wiring are critical components in motorsport vehicles, providing the necessary data for optimal engine performance and system control. These sensors include oxygen sensors, MAP (manifold absolute pressure) sensors, knock sensors, and throttle position sensors. Oxygen sensors monitor the air-fuel ratio by measuring the oxygen levels in the exhaust gases, enabling the ECU to adjust fuel injection for optimal combustion. MAP sensors provide data on the air pressure within the intake manifold, crucial for determining engine load and adjusting the fuel mixture. Knock sensors detect engine knocking or pre-ignition, allowing the ECU to modify the ignition timing to prevent engine damage.

The wiring in motorsport vehicles is designed to ensure reliable and accurate signal transmission between sensors and the ECU. High-quality, durable wiring harnesses are essential, as they must withstand extreme temperatures, vibrations, and environmental conditions typical of motorsport environments. These harnesses are often made from heat-resistant materials and are meticulously routed to avoid interference and physical damage. Shielded cables are used to prevent electromagnetic interference, ensuring that sensor signals remain clear and precise, which is critical for real-time data processing and adjustments.

Advanced engine management systems in motorsport vehicles utilise a CAN (Controller Area Network) bus system for efficient communication between sensors, the ECU, and other control units. This network allows for high-speed data exchange, enabling real-time adjustments to engine parameters. The integration of sensors and wiring within this system ensures that all components work in harmony, providing the ECU with accurate and timely information. This setup is essential for achieving the precise control and performance required in competitive motorsport, where every millisecond and adjustment can make a significant difference.