Evans Power Cool 180° (Waterless Engine Coolant)

Optimised for performance car engines primarily fabricated from aluminium plus some steel and copper components.

To be competitive racing teams have to push their engines to the limit. This means delivering the greatest amount of fuel possible, without overheating the engine. Efficient heat dissipation is often compromised because water-based coolants boil inside the block, sometimes leading to catastrophic engine failure. Power Cool 180°C has a much higher boiling point than water or water-based coolants and ensures the heat-energy is always being removed, no matter what the load. This enables tuners to squeeze the maximum BHP from their engines.

Please Note: If switching to Evans Waterless Coolant for the first time you must also purchase EVANS Hygroscopic Prep Fluid to remove any dirt, scale and residual coolant. 

Available in 2 litres or 5 litres (Please call if you require 25Litres).

About Evans Waterless Coolant
Since the 1930's engine coolants have been based on a mixture of water, ethylene glycol (antifreeze) and corrosion inhibitors. These mixtures have inherent physical and chemical limitations, they affect engine performance and in some circumstances lead to engine failures.

According to the British Testing Council - Testing Advisory Group... "up to 60% of engine failures can be attributed to cooling system failures"... confirming there are inherent flaws associated to water-based coolants and emphasising the need for something better!

EVANS WATERLESS COOLANT - Waterless coolant represents a major step forward in engine cooling technology which, over the last 20 years, have proven to increase engine reliability, reduce maintenance costs and improve performance.

NO WATER - NO OVERHEATING

Evans Waterless Coolants have boiling points above 180°C, effectively eliminating overheating, boil-over and after-boil.

NO WATER - NO PRESSURE

Evans Waterless Coolants have a very low vapour pressure, eradicating the danger of scalding and reducing the strain on engine components.

NO WATER - NO CORROSION

Water contains oxygen and acts as an electrolyte which leads to corrosion. Evans Waterless Coolants eliminate these corrosion sources.

NO WATER - MORE BHP

Evans waterless Coolants eliminate engine hotspots which lead to poor combustion and loss of power.

NO WATER - NO LINER EROSION

Evans Waterless Coolants are proven to reduce liner pitting by 75% compared with water based coolants.

NO WATER - NO SCALING

Water contains impurities and hardness salts that lead to scaling and poor heat transfer. Evans Waterless Coolants contain none of these impurities.

NON TOXIC

Evans Waterless Coolants are proven to be Non-Toxic. Standard anti-freeze is toxic and known to kill pets.