Eventuri Carbon Fibre Intake System

Eventuri's intake systems are beautifully sculpted in carbon fibre using the latest technology and filtration developments to bring you the most eye-catching aftermarket upgrade for your engine bay, with airflow and performance gains backed by thorough research, development and testing.

• The carbon fibre Venturi filter housing design increases airflow and performance
• Bespoke high-flow air filters increase the filtration surface area and volume of clean air in the intake
• The aluminium cowl provides a smooth airflow entry reducing turbulence
• Large bore intake tubes increase airflow and maintain low air intake temperatures.
• A carbon fibre intake duct provides a more direct and increased airflow
• Long-life laser-cut stainless steel brackets for easy and accurate fitting.

Designed specifically for the Audi (8Y) RS3, this Eventuri Carbon Fibre Intake System has been developed to provide the turbo's most efficient and direct airflow path. Eventuri's patented venturi stack housing and custom intake designs ensure that airflow remains as laminar as possible at all times. Combined with bespoke high-flow filters and vehicle-specific cold air feed/ducts, you get a fully optimised intake system that operates with the lowest inlet air temperatures possible and consistently delivers noticeable performance gains.

Performance Gain: 15-20hp, 13-18ft-lb (RS3 with Stock Turbo)
Flow Bench Data: Stock Intake 530 CFM: Eventuri Intake 840 CFM

At first glance, it's obvious Eventuri intakes are different from the standard filter, intake pipe and heat shield combinations, offered by other aftermarket intake system makers.

Based on their extensive tuning and aeronautics background, the engineers at Eventuri are raising the standards for intake design and development. Focused on a complete solution, each vehicle-specific intake system is extensively developed using cutting-edge design, testing, and prototyping methods. Constructed from only the finest quality components, every intake system undergoes a barrage of Computational Fluid Dynamics (CFD) analysis, including volumetric airflow, intake temperature and dyno testing, to ensure accurate performance figures are achieved.

This system uses Eventuri's patent pending carbon fibre housing which provides an aerodynamically efficient airflow path from the filter to the turbo tube. The filter housing comprises a high-flow filter, aluminium cowl, laser cut bracket and the carbon pod itself. Due to the intense heat fom the turbo, Eventuri has incorporated a heat shield with gold reflective backing that deflects heat from the turbo and catalyst away from the carbon fibre intake tubes to maintain lower temperatures.

Eventuri's ground-breaking design utilises a reverse-mounted cone filter that is decoupled from the intake pipe, giving a much smoother airflow, and eliminating the abrupt internal geometry changes found in conventional cone filter/pipe setups. The smooth reduction in cross-sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. This improved design allows the whole filter housing to act as a velocity stack, increasing the volume and speed of air entering the turbo, which directly translates to better engine performance.

Oversized carbon fibre turbo intake tubes increase the volume and flow of air to the turbo removing restrictions from the OE pipework. The final part of the intake is the carbon fibre duct which fits inside the OEM ducting system and directs ambient air from the slam panel. Once the car is in motion, specially designed edge rubbers maintain a secure and sealed connection to provide an enhanced airflow, that effectively forces air into the duct and displaces any ingress of hot air from the engine bay. Due to restrictions identified with the OE slam panel air ducts, Eventuri engineers lifted the top edge creating an oval opening above the slam panel equivalent to an additional 7" aperture for a superior cold air feed

The OE filter and factory-fitted airbox systems create a more turbulent airflow due to the mating of a rectangular air filter/airbox system to a round turbo inlet. Replacing this inefficient set-up with a carbon fibre venturi stack/housing or custom intake design, combined with bespoke filtration, results in not only a more direct and smooth airflow all the way to the turbo/intake manifold, but a stunning visual upgrade for your engine bay, that is sure to make you the envy of anyone who sees it.

Replacement filter Type - D is available here

Full fitting instructions are found here

Contents:
Carbon Fibre Patented Venturi Filter Housing With 103Mm Outlet
Bespoke High Flow Dry Cone Filter
Carbon Fibre Inlet Duct
Carbon Fibre Tube (Id: 103Mm)
Gpf (Dwna) Breather Adapter
Heat Shield With Gold Reflective Backing
Laser Cut Stainless Steel Brackets
Silicon Breather Hose
Silicon Couplers And Reducer