Warrior Ramp, Wheel Chock, Front & Rear Stands and Uber Tyre Warmer Bundle

The Warrior Bundles provide you with a set of products which will make the maintenance and transportation of your bike quicker and easier.

• Folding design
• Clamps onto the front wheel
• Twin wheel design
• U-shape footprint
• Thermostatically controlled

The Warrior Motorcycle Loading Ramp features a lightweight Aluminium construction and is easily portable with its unique folding design. The unfolded length of 2225mm and width of 230mm provides the optimum ramp angle to provide easy loading of bikes weighing up to 340kgs/750lbs, on/off trailers and other transport vehicles.

The Warrior Wheel Chock which fits 12-19" inch wheels is a very ingenious product. The Wheel Clamp has been made from tubular steel construction which has been designed specifically to support the bikes front wheel keeping the bike upright. The wheel chock is ideal for when working on, transporting or storing your motorcycle. Simply roll the front wheel into the pivot clamp, which once rolls over centre locks the front wheel firmly in position; using the bikes own weight to keep secure. Please Note: Bike must also be secured using tie-down straps.

The Warrior Front Paddock Stand has a twin wheel design which provides extra stability when lifting and the U-shape footprint offers stability while the bike is in the air. The stand comes supplied with spring-loaded fork prongs allowing for different widths of fork legs. The Warrior Front Paddock Stand has been finished in a corrosion resistant red enamel. The minimum and maximum widths of the fork adaptor plates are approx. 230-305mm. The height from the ground to the top of the pins in the raised position is approx. 365mm. Please Note: All front paddock stands are designed to be used in conjunction with an appropriate rear stand to ensure bike stability – do not use a front stand only.

The Warrior Rear Paddock Stand has a twin wheel design which provides extra stability when lifting and the U-shape footprint offers stability while the bike is in the air. The stand comes supplied with spring-loaded quick release cup adaptors which allow for different widths of swing arms. The Warrior Rear Paddock Stand has been finished in a corrosion resistant red enamel. The maximum opening distance of the paddock stand hooks is approximately 12.5 Inches (32cm).

The Uber Motorcycle Tyre Warmers are thermostatically controlled with dual LED indicators which illuminate RED when the warmer is heating, switching to GREEN when the pre-set maximum temperature (80 Degrees) is reached. The heating element design ensures optimum heat coverage across the tyre and into the rim, fully insulated to retain the generated warmth. The warmers are secured by sturdy Velcro fasteners, the contoured shape and elasticated sides aiding simple and effortless fitting.

• The 120 Front - 140/150/160 Rear will fit front tyres with the width of 120 and rear tyres with the width of 140/150 or 160.
• The 120 Front - 180/190 Rear will fit front tyres with the width of 120 and rear tyres with the width of 180 or 190.