Gojak Vehicle Jacks

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.

• Easy entry
• Easy lift
• Easy movement

2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and stable in use, and its purely mechanical design eliminates the need for electric power, compressed air or slow and leaky hydraulics.

Models are available offering a varied choice, depending on your needs:

• The Model 5211 (was 5000) Gojak is the workhorse of the Gojak range. The basic design has barely been changed since its first development nearly 20 years ago. The 5211 Series Gojak is a proven and reliable product that can lift and move wheel weights up to 565kg/1,250 lbs. (up to 2260kg/5,000 lbs with four units). Capable of lifting tyre widths up to 230mm (9’’) wide and up to 815mm (32’’) tall, the unit accommodates a very large percentage of passenger cars and race cars. It uses a bi-directional linear ratchet for the jack and 4 inch diameter heavy duty double ball raceway casters. Sold individually and handed to suit the side of the car they are to be used. Load Rating 565kg Each, Tyre Widths Up To 230mm Unit, Weight 13.7kg
• The Model 6313 (was 6200) Gojak is able to jack vehicle weights up to 705kg/1,550 lbs (up to 2820kg/6,200 lbs with four units) including tyre widths up to 330mm (13’’) wide and 915mm (36’’) tall. This is the most versatile and strongest Gojak in the range. It has steel rollers, wider axles and two 5 inch diameter, and two 4 inch diameter, heavy duty, double ball raceway casters. This combination makes for easier rolling with heavier loads. The Model 6313 has a 5 degree offset pedal for additional foot to tyre clearance and the under frame clearance is increased an additional approx 50mm over the 5000 Series, which is very useful when pulling cars up flatbed trucks. Sold individually and handed to suit the side of the car they are to be used. Load Rating 705kg Each, Tyre Widths Up To 320mm Unit, Weight 17.5kg
• The Model 4520 Gojak was developed for the race car industry. You can effortlessly lift and move cars with tyres as wide as 500mm (20’’) and up to 920mm (36’’) tall. The unit will handle wheel weights of 575kg/1,655 lbs. (up to 2,300kg/5,060 lbs with four units). Twin rollers on each axle guide the tyre smoothly up and over the axle support bar to lift wider tyres. It uses a bi-directional linear ratchet for the jack portion and has a 5 degree offset pedal angle for additional foot to tyre clearance. Sold individually. Load Rating 575kg Each Tyre, Widths Up To 500mm Unit, Weight 19kg
• The Model 7016 SUV Gojak has been developed for SUVs and pick-up trucks. It deals with bigger wheels and heavier vehicles, up to 7000lbs/3175kg (with four units). It can cope with tyres up to a huge 33" in diameter and 16" in width. Sold individually. Load Rating 793kg Each Tyre, Widths Up To 406mm Unit, Weight 24.04kg