ITG Megaflow JC40 Small Twin Carburettor Air Filter

The ITG Megaflow JC40 Small Twin Carburettor Air Filter range provides a superior solution to air filtration of small twin carburettor installations.

ITG are supplied to the pick of the crop of Motorsport teams across the globe both in racing and rallying and are the only choice for some of the most renowned engine builders in the UK. ITG filters combine truly ultimate performance without sacrificing engine protection.

The ITG Megaflow Air Filter is handmade in the UK and is predominantly designed for competition use, with the filters simply bolting onto the base plates (available separately) providing optimum air flow, engine protection and safety. This is accomplished by providing a three layer 'Trifoam' system, which filters drawn air in stages, with the inner layer including self extinguishing filter foam providing a vital safety aspect designed to reduce damage to the filter should 'blowback' from the carburettor occur.

The 'Red-band/s' fixed to the filter enable secure attachment to the baseplate and maintain overall rigidity, are constructed from a tough, durable yet lightweight fibre reinforced nylon which also has been researched to ensure best match to the baseplate for minimum induction seepage. Easily identified, the ITG 'Red-band' has become a signature for both quality and performance and are available in either single (for sausage shape) or dual (for flat top shape). The foam fitted to the 'Sausage' filter range is held in a fixed position by a hand cut wire mesh which, unlike other filters on the market is formed across all of the filter which ensures the filter ends also remain in best shape for optimum filtration and great long term appearance as well as the filter body.

ITG recommend a maximum gap between the top of the inside of the filter and the carburettor inlet (or trumpets/ram pipes) ensuring sufficient air to circulate, but 13mm (1/2") (19mm gap if ram pipes/trumpets are fitted) should provide suitable circulation should space be at a premium.

The JC40 range of filters is designed for small twin carburettor installations and are available in flat top or domed (sausage) designs depending on installation requirements. The filter range ensures maximum versatility as various inner height sizes are available.

Please note: ITG air filters require pre-oiling prior to installation.