Summit Technologies Raptor GP Pro Solid State Steering Wheel Button Control System

This latest version of the Raptor is the best yet and includes many improved features which come as the result of an extensive research and development program. The Raptor GP Pro is an 8 channel steering wheel panel which features solid state wireless RF controls removing the need for coiled cables. The solid state receiver features 12v 250ma regulated outputs which can be switched down to 5v logic level for PDM connection. Available for both race cars and also IVA compliant for road cars and kit cars. Raptor fits to aftermarket steering wheel with a 6 x 70mm bolt pattern and a minimum diameter of 300mm. This means it will fit most wheels manufactured by Momo, Sparco, OMP, Mountney, Motocorsa, Simoni Racing, Reverie and many more. (see below for steering wheel fitment template)

• Fully wireless , no coiled cables
• User configurable button operation
• Control up to 8 different channels
• Solid state technology for ultimate reliability and performance
• Water, oil and fuel resistant. Designed to withstand harsh Motorsport environments
• Waterproof Deutsch Motorsport Enclosure with Deutsch Connector (Pre-wired with 30cm tails)

The control panel is manufactured from 3.2mm thick composite material and is incredibly tough as well as being water, oil and fuel resistant to IP65. All of the wiring is integrated into the panel so there is nothing external to snag or break. The switches are resin filled with protective caps to provide longevity and reliability. The panel is powered by a 3v CR2032 battery which can be changed via the magnetic, quick release centre cap. The cap also features an LED which changes colour to display the current battery condition.

The 12 volt receiver module has been developed to fit within a waterproof Deutsch enclosure to withstand the harsh environment a competition car endures. A wiring loom with Deutsch connector provides freedom of mounting.

The Raptor has been designed to be fully user configurable and each of the buttons can be set to perform as either a Momentary, Latching or Flashing action. This gives the flexibility to use the Raptor to control pretty much anything in the car including Lighting, Horn, Lap timers, Traction Control, Launch Control, Wipers, Fans, Radio Communication and much more.

The Raptor GP Pro can be configured either for race use or as an IVA compliant system for use on road cars:

Race configuration: The race version has no preset channels so can be user set to control whatever you require. When set to Flashing action the flash rate is pre set to 4 times per second (4hz) which is ideal to use as a 'Flash to pass' function when connected to the headlights. A sheet with decals designed to neatly fit into the switches is included and features many popular symbols such as PTT, rain light, flash, lock,  TCS, NOS arm and NOS fire plus many more. 

Road configuration: The road version is fully IVA compliant and includes a decal sheet with IVA recognised symbols for functions such as headlights, indicators, horn, hazard lights, wipers, washers plus many more. The high quality symbols fit neatly in the buttons to allow complete personalisation . The flash rate is pre-set at 2 times per second (2hz) which is an IVA requirement. The road version also features some clever cancellation logic which prevents more than one signal (indicator) button being active at the same time.

What's in the box?

Steering wheel button transmitter plate, 8 channel solid state receiver, wiring loom with Deutsch connector, CR2032 battery, decal sheet with 56 different decals installation instructions.

Fitment template