Link Engine Management G4+ Force GDI WireIn ECU

The G4+ Force GDI is an ECU from Link Engine Management designed specifically for use on petrol engines with direct injection. It provides full injection control on up to 4 cylinder direct injection engines as well as offering E-throttle control and on-board digital wideband Lambda control.

• Designed for direct injection engines
• Full fuel injection control for up to 4 cylinder engines
• E-throttle control (DBW)
• High voltage injector and high pressure fuel pump management
• On-board digital wideband Lambda control
• 2 Channel knock control
• 2 Channel CAN communication

Specification Overview:

Inputs
8/10* x Digital inputs
4 x Temperature inputs2 x Trigger inputs
2 x Knock inputs
1 x LSU 4.9 Wideband lambda sensor input
*2 inputs required when using 2nd CAN Bus

Outputs
4 x High voltage injector drivers (60V 10/5A Peak/Hold Current)
1 x GDI pump/Spill valve driver (11.8/6A Peak/Hold)
4 x Ignition drivers
10 x Auxiliary outputs#
+5V Sensor power supply
+8V Sensor power supply

#unused ignition drives can be used as additional Aux outputs

Communications
2* x CAN bus
1 x Serial (RS232) connection
1 x USB tuning connection

Dimensions: 185mm(L) x 130mm(W) x 40mm(H) (without looms)
Weight: 680g

Advanced features found only on the Force GDI:

4 high voltage Boost/Peak/Hold GDI injector drives, user definable voltage, current and durations.
1 x Spill valve/GDI pump driver, peak & hold or saturated mode. User definable current.